| Product code | Packing specification | Colour | Viscosity | Maximum radial clearance | Curing rate (Initial solid/full solid) | Temperature range | Shear strength | Peculiarity |
| TS603 | 50ml/250ml | green. | 100~150 | 0 .13 | 20min/24hrs | -50~ 150 | 16~25 | ◎ High strength, seal and hold cylindrical parts ◎ Maximum radial filling gap is 0.13mm ◎ Fast curing, can prevent vibration wear and corrosion of metal fittings |
| TS609 | 50ml/250ml | green. | 100~300 | 0 .13 | 10min/24hrs | -50~ 150 | 10~20 | ◎ High strength, for rigid metal parts ◎ Maximum radial filling gap is 0.13mm ◎ Can be easily matched with parts of different metal materials |
| TS620 | 50ml/250ml | green. | 5000~12000 | 0 .30 | 20min/24hrs | -50~230 | 14~25 | ◎ High viscosity, high strength, no flow ◎ Maximum radial filling gap is 0.3mm ◎ Can withstand high temperature to 230℃ ◎ Can prevent metal vibration wear and corrosion |
| TS638 | 50ml/250ml | green. | 1800~3300 | 0 .25 | 5min/24hrs | -50~ 150 | 22~40 | ◎ Fast curing ◎ Used for dynamic load or periodic working conditions, can be fixed with a clearance of 0.25mm shaft hole fit |
| TS648 | 50ml/250ml | green. | 400~800 | 0 .15 | 5min/24hrs | -50~ 175 | 20~30 | ◎ Temperature resistance up to 175℃ ◎ Filling gap 0.15mm. Initial cure in 5 minutes ◎ Can be used for transmission gear, motor rotor installation |
| TS680 | 50ml/250ml | green. | 800~1500 | 0 .25 | 10min/24hrs | -50~ 150 | 15~25 | ◎ Fixed casing, pulley, gear, rotor. Repair holes, shaft fittings, out-of-order parts ◎ Maximum radial filling gap is 0.25mm, initial curing within 10 minutes |
| TS11747 | 50g/1kg | blue. | 7000~33000 Thixotropic typeThixotropic | / | 20min/24hrs | -50~ 150 | 14 | ◎ High viscosity, high strength, fast curing ◎ Blue, used for internal combustion engine and other bowl plug seal fixation |
| TS33648 | 250ml | green. | 1000~2500 | / | 18min/24hrs | -50~150 | / | ◎ Anaerobic type, specially designed for oil field, oil, water and high temperature resistance ◎ High strength, fast curing |
Wechat public account
